Tool Support

Feeds and Speeds

The Engineering Garage has a Speeds and Feeds Library for all The up-to-date library here:

**S&F Lib google sheet**

Tool Libraries

Here are the most up to date tool libraries. Follow **THIS** how-to page to update them.

CAM Validation

Fixture and Machine Models

Fixture and machine models are available from the table below. 

Validation in PathPilot

Use the virtual PathPilot interface HERE to check the tool path in a virtual machine.

Solidworks (HSMWorks)

1 - Access

1. On the design computers in the Engineering Garage.
2. Download for personal computers HERE.

2 - Configure

After installing HSMWorks, it needs to be configured to the mills in the Engineering Garage.

Download the folder below and follow **THIS** how-to page. 

3 - Learn

HSMWorks tutorials are built into the software. Search "HSMWorks Tutorials" under commands in the Solidworks search bar.

4 - Practice

Practice using HSMWorks for the mills in the Engineering Garage by recreating the CAM for these models:

**SW_1.Zip with CAM**

**SW_2.Zip with CAM**

Fusion 360

1 - Access

1. On the design computers in the Engineering Garage.
2. Download for personal computers HERE.

2 - Configure

After installing Fusion 360, it needs to be configured to the mills in the Engineering Garage.

Coming Soon

3 - Learn

Follow the tutorials HERE to learn CAM in Fusion 360.

4 - Practice

Practice using Fusion 360 CAM for the mills in the Engineering Garage by recreating the CAM for these models:

**F360_1.Zip with CAM**

**F360_2.Zip with CAM**