CAM Support
Tool Support
Feeds and Speeds
The Engineering Garage has a Speeds and Feeds Library for all The up-to-date library here:
**S&F Lib google sheet**
Tool Libraries
Here are the most up to date tool libraries. Follow **THIS** how-to page to update them.
CAM Validation
Fixture and Machine Models
Fixture and machine models are available from the table below.
Validation in PathPilot
Use the virtual PathPilot interface HERE to check the tool path in a virtual machine.
Supported CAM Software
Solidworks (HSMWorks)
1 - Access
- On the design computers in the Engineering Garage.
- Download for personal computers HERE.
2 - Configure
After installing HSMWorks, it needs to be configured to the mills in the Engineering Garage.
Download the folder below and follow **THIS** how-to page.
3 - Learn
HSMWorks tutorials are built into the software. Search "HSMWorks Tutorials" under commands in the Solidworks search bar.
4 - Practice
Practice using HSMWorks for the mills in the Engineering Garage by recreating the CAM for these models:
**SW_1.Zip with CAM**
**SW_2.Zip with CAM**
Fusion 360
1 - Access
- On the design computers in the Engineering Garage.
- Download for personal computers HERE.
2 - Configure
After installing Fusion 360, it needs to be configured to the mills in the Engineering Garage.
Coming Soon
3 - Learn
Follow the independent video tutorials HERE to learn CAM in Fusion 360.
4 - Practice
Practice using Fusion 360 CAM for the mills in the Engineering Garage by recreating the CAM for these models:
**F360_1.Zip with CAM**
**F360_2.Zip with CAM**